Semi Automatic Dense Liquid Filling Machine - CYD-Y1500

Technical Specifications of CYD-Y1500 - 200-1500ml Dense Liquid Filling Machine

Model	CYD-Y1500
Operation Range	200 - 1500 ml
Capacity	10 - 30 Filling/Minute
Filling Accuracy	±%1
Input Voltage	220V AC
Input Current	1A
Power Consumption	10W
Air Pressure	0,4 - 0,6 MPa (4 - 6 Bar)
Dimensions	125 * 49,5 * 46 cm
Weight	30 kg
Mode of Operation	Pedal or Automatic
Material	Stainless Steel
Energy	220V / 50HZ
Suction Pipe	304 Stainless
Suction Pneumatic Cylinder	DNC Type Thick Wall, Honed Type
Nozzle Pneumatic Cylinder	Square cylinder
Chassis	Stainless Steel
Sensors	Mindman Made in China
Pedal Material	Plastic Pedal
Outer Box Material	Cardboard
Gasket Group	Silicone

General Specifications of CYD-Y1500 - 200-1500ml Liquid Filling Machine

1. It can fill 200 ml - 1500 ml of all low and medium viscosity products.
2. The CYD-Y1500 semi-automatic single nozzle  dense liquid filling machine has a flanged ferrule system at the connection points, allowing the machine to be easily disassembled and cleaned quickly.
   
3. All materials such as gaskets and seals at the points that come into contact with the product during liquid filling are made of anti-bacterial silicone material. Thus, you have established a system that meets hygiene requirements (GMP requirements).
4. 0.5 mm pitch precision dosing arm allows you to work with a single machine in many filling ranges with minimum drift rate. Unless the dosing setting is changed, it continues to operate at the same size.
5. CYD-Y1500 semi-automatic single nozzle Dense liquid filling machine has an emergency button that allows the machine to be brought to a safe position in case of emergency, regardless of the position of the machine. In this way, you have a way of production that complies with the occupational safety law numbered 6331. It does not require extra costs to make it compliant with the law in question.
6. It can be connected to the tank or tank drains with a clamp and can also suction from sources such as drums, buckets or buckets by immersion method. It does not require extra effort to bring the product to the mouth of the machine. This helps you save time.
7. You can operate the CYD-Y1500 semi-automatic single nozzle  dense liquid filling machine in two different ways according to your production speed and format. Either you can operate the machine in automatic mode with timer or you can operate it in manual mode with the pedal which is supplied free of charge with the machine..
8. The nozzle system has an anti-drip system. In this way, you will not experience dripping problems after the filling is completed. As a result, your filled bottles will not get dirty and you will not experience weight loss due to dripping.
9. Unlike other similar products, it has a honed product suction piston. This piston allows dosing with high precision even at high weights and minimizes filling waste. On the other hand, since the piston surface is smooth, the piston seals last longer than their counterparts.
10. The internal conditioner in the machine system provides protection against factors such as water and rust that may occur in the air installation and damage the pneumatic system of the machine. Thanks to the slide valve on the air inlet of the machine, you can cut off the air from the system when you are done with the machine without the need for a different valve.
11. Having an electro-pneumatic system provides the advantage of precise dosing and preventing weight wastage.
12. The earthing in the chassis of the machine protects the machine against electrical hazards that may occur in the body of the machine.
13. CYD-Y1500 semi-automatic single nozzle  dense liquid filling machine can fill many liquids. Among the liquid types in question; Honey, molasses, pomegranate syrup, jam, shampoo, tahini, cream, hair lotion, acuka, garlic sauces, yogurt, especially many dense liquid types can be used in filling processes. There are also many liquids such as fruit juice, water, turnip, liquid soap, milk, liquid oil, mineral oil, syrup.

Optional Features that can be added to CYD-Y1500 - 200-1500ml Liquid Filling Machine

• The sensor of the machine can be produced as triggered.
• Filling nozzles in the filling nozzles can be produced in different sizes according to the needs.
• Optionally, a mechanical position inductor counter can be added.

CYD-Y1500 - Liquid Filling Machine 200-1500ml - Other Details

• The machine is packaged in a way that is suitable for easy shipment over long distances.
• The machine you purchased can be delivered to your address at an affordable price with our contracted cargo. If you wish, shipment can also be made with your own contracted cargo company.
• The machine is guaranteed for 1 year against fabrication defects.